Datamaster T0046, Руководство пользователя

Страница: 5 / 19

Datamaster
®
T0046 Professional LAN Cable Tester – User Guide
Page 1
The Datamaster
®
Professional LAN Cable Tester is suitable for use with UTP (unshielded)
and STP (shielded) Cat-5, Cat-5E, Cat-6, Cat-6A and also with Coaxial cables. The Loopback
and Remote operating modes indicate cable continuity, wiring configuration (and type of fault)
and the type of cable being tested. TDR (Time Domain Reflectometer) technology is used to
measure cable lengths between a range of 1 to 350 metres. TDR is also used to indicate the
distance to a short or open circuit.
Auto-off mode (except in TONE MODE) prolongs battery life. A low-battery condition is
displayed when it is time to change the battery. The backlit LCD screen has four lines of 16
characters. A Tone mode is provided for F-Set probe fault location or identification. There are
24 memory locations for storing test results.
It is supplied with
belt clip, black zippered vinyl pouch, 2 x F-type to BNC coax adaptors, 2 x 8P to
6P modular reducers and a 9V battery.
1
INTERFACES AND CONTROLS
8P8C Loopback Jack
Coaxial F-Connector
8P8C Main Jack
4 line, 16 character LED screen with
menu-selectable backlighting
Power switch
Mode Selection buttons:
LAN
TEL
COAX
TONE
LENGTH
Memory button
Setup menu button
Test / Enter button
Navigation keys
Battery compartment (on rear)
Remote Terminator storage