TCP/IP COMMUNICATION
53 SMART-VS
ACQIMG (ACQuireIMaGe)
It allows acquiring an image that will be saved among the reference images of the spec
-
ified class within the job being edited/created.
Syntax:
ACQIMG;LabelID<CR><LF>
LabelID: index of the label to be assigned to the acquired image.
Reply:
ACQIMG;ReturnCode<CR><LF>
Possible return codes:
• Success → Command successful.
• NotInSession → The command was called without a configuration session being
started (the device is in running state).
• NotInJobEditing →The device is in configuration but no job is being edited/cre
-
ated.
• InvalidInput → The index of the indicated label cannot be used (index> 1).
• MaxNumberOfImage → The image cannot be acquired because the maximum
number of images that can be captured has been reached (per class or for the
entire job).
CLRBNK (CLeaRBaNK)
Cancel the job on the bank indicated by the parameter.
Syntax:
CLRBNK;BankId<CR><LF>
BankId: Bank number on which to cancel the job (may not be the current bank).
Reply:
CLRBNK;ReturnCode<CR><LF>
Possible return codes:
• Success → Command successful.
• AlreadyInConfiguration→ The command was called while creating\editing a job
(through any interface).
• InvalidInput → The bank number to be configured is invalid (bankId > 31).
• Failed → The specified bank does not contain any jobs.
CLRJBS (CLeaRJoBS)
Delete all jobs on the device.
Syntax:
CLRJBS<CR><LF>
Reply:
CLRJBS;ReturnCode<CR><LF>
Possible return codes:
• Success → Command successful.
• AlreadyInConfiguration→ The command was called while creating\editing a job
(through any interface).
INDEX
LABEL
0
GOOD
1
NO GOOD
