RAPID CONFIGURATION
5 SMART-VS
Button Incremental Teaching Procedure (optional)
When in Run mode (Run green LED steady on), training images can be added to the cur
-
rent job.
7. Short press (< 1s) the HMI Button to acquire
the image. More than one NO GOOD object
can be acquired.
8. Long press (> 4s, until the red LED on HMI
lights up) the HMI Button to enter the auto
-
matic learning procedure (LEDs game). In the
end, the device will enter the Run Phase
NOTE: The Teaching procedure can also be entered when in Run phase:
press the HMI Button for 2s (yellow LED on HMI) for incremental teaching
or 4s (red LED on HMI) to cancel and re-teach.
NOTE: It is recommended to perform this procedure via WebApp to have
more control over this operation.
1. Press the HMI Button for approx. 2 seconds
and release it as soon as the HMI yellow LED
turns on.
2. New GOOD object images can be added to
the current job.
If incremental teaching is needed for NO
GOOD objects only, skip to step 3.
Short press (< 1s) the HMI Button to acquire a
GOOD image.
