INSTALLATION
5
2
2.2 INSTALLING DEVICE DRIVERS ON PC
To guarantee a correct RS232 or USB connection between the host and the
Viper™CE terminal through the Viper™CE cradle, the related drivers have to be
installed.
In order to install the RS232 driver, it is necessary to have at least the following:
-
PC with a Pentium processor;
-
One of the following operating systems:
Windows
2000
Windows
XP
For the USB driver installation, it is necessary to have at least the following:
-
PC with a Pentium processor;
-
One of the following operating systems:
Windows
98
Windows
ME
Windows
2000
Windows
XP
NOTE
Once the RS232/USB driver has been installed, the communication
between PC and cradle will be performed through a virtual Infrared
port.
2.2.1
RS232 Device Driver Installation
The following procedure allows installing the RS232 driver on the PC. In particular,
the PC is configured to handle the cradle as an infrared port.
Before performing the installation, ensure that the Viper™CE cradle has already
been connected to the PC serial port.
1. Start the “Add/Remove Hardware Wizard” in the PC Control Panel:
Содержание Viper CE Cradle
Страница 1: ...Viper CE Cradle User s Manual ...
Страница 2: ......
Страница 3: ...Viper CE Cradle USER S MANUAL ...
Страница 6: ...iv ...