Datalogic Touch 90 pro, Руководство по продукции

Страница: 173 / 332

Interleaved 2 of 5 (I 2 of 5) Enter/Exit Programming Mode
Product Reference Guide 163
I 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for I 2 of 5 Length Control . Length 2 is the
maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length
Mode. The length includes the bar code’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length). See
"Set Length 2" on page 280 for more detailed programming instructions.
$CI2L2
Select I 2 of 5 Length 2 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
Appendix D, Keypad
repre-
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters