background image

NOTE

USING THE SMART-VS WEBAPP

PRODUCT REFERENCE GUIDE   13

The following options are also available:

Show all images or just one category 
between GOOD, NO GOOD, and OVERRUN

Download the entire filmstrip

Settings

This page contains I/O Settings and General Settings.

It can be reached using the hamburger icon on the upper right corner.

Under I/O Settings two parameters can be adjusted:

Trigger Input Delay

: the delay to apply prior to the acquisition process of the trig-

ger event. It is measured in time (ms). This parameter can be adjusted along with 
image acquisition: images are shown on the related window.

Output Hold Time

: the time (ms) during which the output data remains valid.

Under Other Settings the following parameters can be customized:

Trigger Input Event

: can be either Leading or Trailing.

Trigger Input Debounce

: filter debounce time measured in 

μ

s.

Remote Teach Input Event

: available selections are Leading and Trailing.

Remote Teach Input Debounce

: filter debounce time measured in 

μ

s.

It is recommended to enable the browser option “Ask where to save each 
file before downloading”.

Содержание Smart-VS





















































Отзывы: