Datalogic SC4000, Справочное руководство

Страница: 47 / 59

TYPICAL LAYOUTS
6
Communication Settings / Gateway / Data Tx <checked>
Communication Settings / Gateway / Bus
Communication / Node Address Aligned to the Fieldbus
Master configuration
Communication Settings / Gateway / Bus
Communication / (Master Input Area Size,
Master Output Area Size, Data Flow Control,
Data Consistency) Coming from the GSD
modules configuration GSD File =
DLA_0BAC.gsd
Communication Settings / Auxiliary Serial
Port / Line Parameters/ (all parameters) Aligned to the Data Source
device configuration Data Source device
to the Auxiliary port
Communication Settings / Auxiliary Serial
Port / Data Pass Through <checked> Data Source device
to the Auxiliary port
Communication Settings / Auxiliary Serial
Port / Data Pass Through Options / Data
Destination: Gateway <checked> Data Source device
to the Auxiliary port
Communication Settings / Auxiliary Serial
Port / Data Pass Through Options /
Termination String Aligned to the Data Source
device configuration Data Source device
to the Auxiliary port
6.5 SC4000 ID-NET™ SYNCHRONIZED MASTER/FIELDBUS SLAVE TO
HOST FIELDBUS MASTER
ID-NET™ Slave Nodes
CBX100 CBX100 CBX100

Reader ID-NET™ Interface

SC4000 ID-NET™ Interface

SC4000 Host 1>BMxxx Fieldbus Module
1 1 1
Power
3
DS2100N
4
SC4000
2
Host
Fieldbus Master
PS
I/O

Aux Interface for SC4000 Configuration and
Slave Reader Configuration through ID-NET

Reader in Pass Through on Host 2 or Source
Auxiliary Interface
5
39