Datalogic QBT2101-BK-BTK+ Скачать руководство пользователя страница 286

Страница: 286 / 360

276

QuickScan™ I QD21X1 / QM21X1 / QBT21X1

STAR Radio Transmit Mode

Specifies the transmission protocol for Star communications.
Options are:

• ACK from cradle to scanner — signals a good transmission as soon as the

Base Station receives a label

• ACK when sent to host — scanner signals a good transmission as soon as

the Base Station has sent the label to the host

• ACK from host — scanner signals a good transmission as soon as the Base

Station has sent the label to the host and host has replied with an

acknowledge message.

ACK from cradle

ACK when sent to host

ACK from host

NOTE

The Base Station can receive a host message only if Host Com-
mands Obey/Ignore (

page 27

) is set to Ignore.

ACK from host works only for RS232 or USB-COM interfaces with

ACK/NACK disabled. If ACK from host is configured with any other
interface conditions, it works like ACK when sent to host.

See

"Message Formatting"

on page 277 for details.

DEFAULT

Содержание QBT2101-BK-BTK+









































































































































































































































































































































































Результаты поиска

Содержание QBT2101-BK-BTK+

Отзывы:

Datalogic QBT2101-BK-BTK+, Руководство по продукции, Страница: 286 / 360

Результаты поиска

Содержание QBT2101-BK-BTK+

Отзывы: