Datalogic PowerScan M8500, Краткое руководство пользователя

Страница: 13 / 44

PowerScan™ M8500 Configuration
Quick Reference Guide 9
+
four digits for Hours and Minutes (HHMM).
5. Set Radio Address
+
four digits for the PowerScan™ M8500 Address
(from 0000 to 1999).
All readers used in the same area must have different addresses.
6. Exit and Save Configuration
7. Read the Bind code to pair the PowerScan™ M8500 to the BC-80X0 cradle.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
To connect several readers to the same cradle see the following section "Using
Multiple Readers with Same Cradle".
Bind
The green LED on the PowerScan™ M8500 will blink: the reader is ready to be
positioned onto the cradle.
8. Firmly position the reader onto the cradle within 10 seconds, a beep will be
emitted, signaling that the BC-80X0 cradle has been paired to the
PowerScan™ M8500, and the green LED on the reader will go off.