Datalogic ADC, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©
2007-2014 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this
documentation or the procedures described therein may be reproduced or
transmitted in any form or by any means without prior written permission of
Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”).
Owners of Datalogic products are hereby granted a non-exclusive, revocable
license to reproduce and transmit this documentation for the purchaser's own
internal business purposes. Purchaser shall not remove or alter any proprietary
notices, including copyright notices, contained in this documentation and shall
ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed
versions by contacting your Datalogic representative. Electronic versions may
either be downloadable from the Datalogic website (www.datalogic.com) or
provided on appropriate media. If you visit our website and would like to make
comments or suggestions about this or other Datalogic publications, please let us
know via the "Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual
that is complete and accurate, however, Datalogic reserves the right to change any
specification at any time without prior notice. Datalogic and the Datalogic logo are
registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A.
and the E.U. All other brand and product names may be trademarks of their
respective owners.
PATENTS
This product may be covered by one or more of the following patents.
Design Pat. AU 310201; AU 310202; CN 693980; CN735959; HK 0602013.5M001; HK
0602013.5M002; JP 1305693; KR 30-0460940; US D570,843 S; USD588,596 S.
US Pat. 5,992,740; 6,305,606 B1; 6,517,003; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2;
5,367,151; 5,449,893; 5,545,889; 6,098,877; 6,220,514 B1; 6,412,698 B2; 6,607,132 B1;
6,817,529 B2; 6,834,805 B2; 7,948,214 B2.
European Pat. 789,315 B1; 895,175 B1; 1,128,314 B1; 1,128,315 B1; 1,396,811 B1; 1,413,971
B1; 1,816,585 B1; 1,942,442 B1.
Additional patents pending.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log
on to
www.datalogic.com
and click on the links indicated for further information
including:
•
PRODUCTS
Search through the links to arrive at your product page where you can download
specific
Manuals
and
Software & Utilities
including:
-
Datalogic Aladdin™
, a multi-platform utility program that allows device
configuration using a PC. It provides RS-232 interface configuration as well as
configuration barcode printing.
•
SERVICE & SUPPORT
-
Technical Suppor
t - Product documentation and programming guides and
Technical Support Department in the world
-
Service Programs
- Warranty Extensions and Maintenance Agreements
-
Repair Services
- Flat Rate Repairs and Return Material Authorization (RMA)
Repairs.
-
Downloads
– Manuals & Documentation, Data Sheets, Product Catalogues, etc.
•
CONTACT USInformation Request Form and Sales & Service Network
ELECTRICAL CONNECTIONS
The PowerScan™ D8340/D8340 AR scanner can be used with CAB 468 (coiled cable and 9-
pin male connector) for direct connection to the DATAPLUS and DLD series decoders.
CAB 468
1 - Not connected
5 - TRIGGER
2 - SCAN
6 - BEEPER/LED
3 - Not connected
7 - VIDEO
4 - GND
8 – LASER ON
9 - +VCC
9-pin male connector
6
7
8
9
1
2
3
4
5
PowerScan™ D8340
READERS
QUICK REFERENCE GUIDE
820035814 (Rev. F) June 2014
CHINA ROHS STATEMENT
Chi
na RoHS
ㇱ
ઙฬ⒓
Lead
(P
b)
Me
rc
u
ry
(Hg)
Cadm
iu
m
(Cd)
He
x
a
val
ent
Chrom
iu
m
(Cr(V
I)
)
P
ol
y
brom
inat
ed
bi
phenyl
s
(PBB)
P
ol
y
brom
inat
ed
di
phenyl
et
hers
(PBD
E)
Ქኂ
‛
凝
ᚗర
⚛
PART
卋
ᳮ
叏
ચ
卲
ᄙ
ᄽ侶
ᄙ
ᄽԲㅘ
P
ri
nt
ed Ci
rc
ui
t B
oard
A
s
s
e
m
bl
y
⬉䏃ᵓ㒘
ӊ
X O
O
O
O
O
A
s
s
y
, M
odul
e
ܝᄺ㒘ӊ
X O
O
O
O
O
O
ઍ
ᱝ
Ẋ
ㇱઙ⊛
ᚲဋ
凝ޗறխ
ࢬܶऱ
具Ẋڶ
ڶ
୭ढ凝݁
܅Պխ
䦀Գا
٥ࡉ
㧺ॾஒ䣈
䢓ຝ
ᚲ
咒ؒ
⊛
ޝ
䶣ॾஒ䣈
խڶ
ڶ୭
ढ凝ऱૻ
ၦޣ
ρ
(S
J/
T 1
13
63-
2006)
億ࡳऱૻၦ
ޕ
X:
ઍ
ᱝ
Ẋ
ㇱઙᚲ
↪⊛ဋ
凝ޗறխ
,
⥋ዋ
৻
㮕
᧚ᢱ
ᚲ⊛
Ქ
ኂ‛
凝Պխ䦀Գا
٥ࡉ㧺
ॾஒ䣈
䢓ຝ
ᚲ
咒ؒ
⊛
ޝ
䶣ॾஒ䣈
խڶ
ڶ୭
ढ凝ऱૻ
ၦޣ
ρ
(S
J/
T 1
13
63-
2006)
億ࡳऱૻ
㊂
CONNECTIONS
CONNECTING THE CABLE
A. Rubber gasket
B. Plastic boot
C. Cable spacer
D. Cover
E. Strain relief
1. Slip the cover over the cable.
2. Push the plastic boot into the
rubber gasket. Take care that
the tab on the plastic boot is
aligned with the notch in the
rubber gasket.
3. Push the plastic boot and gasket
into the handle. Ensure that the
“Front” marking on the plastic
boot is facing out, with the
arrow pointing towards the
front of the scanner.
4. Insert the cable into the socket
of the plastic boot.
5. Insert the cable spacer into the
cable wire and slide it towards
the handle.
6. Push the cover along the cable
towards the reader, and hook it
over the yellow “tooth”.
7. Insert the strain relief into the
cover and tighten the screw to
fix the whole assembly to the
reader handle.
Align
Notch
Tab
Arrow
COMPLIANCE
LASER SAFETY COMPLIANCE
The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN60825-1 at
the date of manufacture.
The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beam
momentarily causes no known biological damage, avoid staring at the beam as one would with any very
strong light source, such as the sun. Avoid that the laser beam hits the eye of an observer, even through
reflective surfaces such as mirrors, etc.
The following information is shown on the laser scanner device class label:
LED CLASS
Class 1 LED product.
This product conforms to EN60825-1:2007.
The laser light is visible to the human eye and is emitted from
the output window (1).
Laser warning and classification label (2).
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified herein may result in exposure to
hazardous visible laser light.
ITALIANO
LUCE LASER
NON FISSARE IL RAGGIO
APPARECCHIO LASER DI CLASSE 2
FRANÇAIS
RAYON LASER
EVITER DE REGARDER LE RAYON
APPAREIL LASER DE CLASSE 2
DEUTSCH
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN
PRODUKT DER LASERKLASSE 2
ESPAÑOL
RAYO LÁSER
NO MIRAR FIJO EL RAYO
APARATO LÁSERDE CLASE 2
CE COMPLIANCE
Warning:This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of Datalogic could
void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer which supplies power
directly to the reader or else be supplied by a UL Listed/CSA Certified Power Unit marked “Class 2” or LPS
power source rated 4 - 30 V, minimum 420 mA, which supplies power directly to the reader via the power
connector of the cable.
WEEE COMPLIANCE
USING POWERSCAN™ D8340 SERIES READERS
PowerScan™ D8340 readers automatically scan barcodes
at a distance.
Simply aim and
pull the trigger. Code scanning is performed along the scan line emitted from the reading
window. This line must cross the entire code. The best reading angles are indicated in the
figure below.:
For information about the disposal of Waste Electrical and Electronic Equipment
(WEEE), please refer to the website at
www.datalogic.com
.
TECHNICAL FEATURES
POWERSCAN™ D8340/ D8340 AR
Electrical Features
PowerScan™ D8330
PowerScan™ D8330
AR
Power Supply
4 to 30 VDC
Max. Consumption:
0.076 mm (3 mils)
0.25 mm (10 mils)
@ 4V
@5V
@30V
Sleep mode
420 mA
310 mA
62 mA
4 mA
500 mA
370 mA
70 mA
4 mA
Scan Rate
35 ± 5 scans/sec
Reading Indicators
Good Read LED (
green
)
Good Read Spot (
green
),
Beeper
Optical Features
Reading Field
(Typical performance at 20ºC / 68ºF
on high quality barcodes)
97.8 cm (38.5 in)
@ 40 mils
12.5 m (41.0 ft)
@ 100 mils reflective
Max. Resolution
0.076 mm (3 mils)
0.178 (7,5 mils)
PCS (Datalogic Test Chart)
15%
25%
Laser Features
Power (max)
0.9 mW
1.3 mW
Scan Angle
42°
13.5° ± 0.7
Laser Safety Class
Class 2 EN 60825-1/CDRH
Environmental Features
Working Temperature
-30 °C to + 50 °C / -22° to +122 °F
Stora perature
-30 °C to + 70 °C / -22° to +158 °F
Humidity
90% non condensing
Drop Resistance
IEC 68-2-32 Test ED 2 m
Protection Class
IP65
Mechanical Features
Weight (without cable)
about 295 g (10.4 oz)
Cable Length
2 m (6 ft 6 in)
