background image

Enter/Exit Programming Mode

100

PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR

ADD-ONS

Contact Customer Support for advanced programming of optional and con-

ditional add-ons.

Optional Add-ons

The reader can be enabled to optionally read the following add-ons (supple-

mentals):

DEFAULT

Optional Add-Ons = Disable P2

Optional Add-Ons = Enable P2

DEFAULT

Optional Add-Ons = Disable P5

Optional Add-Ons = Enable P5

DEFAULT

Optional Add-Ons = Disable GS1-128

Optional Add-Ons = Enable GS1-128

If a UPC/EAN base label and an add-on are both decoded, the reader will transmit 
the base label and add-on. If a UPC/EAN base label is decoded without an add-on, 
the base label will be transmitted without an add-on. 

 

Conditional add-on settings (if enabled) are considered by the reader before 
optional add-on settings.

Содержание PowerScan 9501-AR Series











































































































































































































































































































































































Отзывы: