Datalogic Pegaso, Руководство по продукции

Страница: 89 / 172

Falcon Desktop Utility
Product Reference Guide B-5
Figure B-3. Setting a Password
Table B-3. Setting a Password Dialog
Complete the
FDU Config
dialog:
1. Type in your password using either the keypad on the unit, or using the stylus on
the soft input panel (
SIP
).
If you enter an incorrect password, the system will prompt you to input the correct
one.
2. Select/tap
OK
to verify the password. Or tap
X
to cancel.
Setting Hot Keys
You can use Hot Keys (HKeys) Tab to associate specific
keys, such as
<F1>-<F10>,
with spe-
cific applications. You can also create a new
Hot Key
combinations (
"Adding a New Hot Key" on
page
B-7
)
. Select the
HKeys
tab to access these options.
For example, you could set
<F2>
to launch a sample application like:
\Windows\pword.exe
.
Command Description
Enter Password
Enter your password using the keypad, or using the stylus on the
soft input panel
( SIP ) in the text box.
OK Select/tap OK to accept the password.
X Select/tap X to cancel the request to start the FDU .