Datalogic Pegaso, Руководство по продукции, Страница: 36 / 172

Configuring the Pegaso
2-22 Pegaso™ Industrial PDA with Windows
®
CE
Remove Programs
See "Removing Programs" on page 3-7 .
Storage Manager
To change the
Storage Manager
control panel default settings:
1. Select
Start > Settings > Control Panel > Storage
Manager
.
2. From the
Store Info
pull-down list, select the
desired storage device.
3. You can also format, dismount, and create par-
titions on storage devices using this control
panel.
4. To save and exit the
Storage Manager
control
panel, tap
OK
on the control bar, or press
<Enter>
on the keypad.
Stylus Calibration
You might need to recalibrate the touch screen (i.e. when you attempt to select one item
with the stylus, another item is erroneously selected).
To recalibrate the touch screen, complete the following steps:
1. Select
Start > Settings > Control Panel > Stylus
to open the
Stylus Properties
dialog as
shown in Figure 2-20 on page 2-23 .
2. Adjust
Double-Tap
sensitivity if needed or desired.
3. Select the
Calibration
tab to open the
Calibration
application.
CAUTION
Dismounting or formatting the persistent storage drive will erase all files and programs
stored in Memory.