Datalogic Pegaso, Руководство по продукции

Страница: 32 / 172

Configuring the Pegaso
2-18 Pegaso™ Industrial PDA with Windows
®
CE
Owner
To change the
Owner
default settings:
1. Select
Start > Settings > Control Panel > Owner
Properties
. The
Input Panel
opens to facilitate
entering data.
2. Enter data using the input panel or the keypad
on the PDA.
3. To exit the
Owner Properties
control panel, tap
OK
on the control bar, or press
<Enter>
on the
keypad.
For more information on using the
Network ID
tab,
refer to "Setting up the Network ID" on page 4-8 .
Password
To change the
Password
default settings:
1. Select
Start > Settings > Control Panel > Password
Properties
.
2. Enter the desired password twice as indicated
in the two fields.
3. Select to enable password protection at power-
on and/or enabling password protection for
the screen-saver.
4. To exit the
Password
control panel, tap
OK
on
the control bar, or press
<Enter>
on the keypad.