manualshive.com logo in svg

Datalogic Pegaso, Руководство по продукции, Страница: 20 / 172

Поделиться
Скачать
Datalogic Pegaso Скачать руководство пользователя страница 20

Configuring the Pegaso

2-6

Pegaso™ Industrial PDA with Windows

®

 CE

Table 2-1. Bluetooth taskbar icons

Settings

The 

Settings

 tab allows you to enable or disable the Bluetooth radio and specify settings 

for Incoming Connections.

Tapping 

Find Me

 will make the Pegaso available to other Bluetooth devices for 60 sec-

onds, allowing them to set up a connection.

Tap 

Apply

 to apply the settings you have selected.

Certificates

Certificates are used by some applications for establishing trust and to secure communi-
cations. See the Microsoft Windows CE help on your unit for further information 
about Certificates.

Date and Time 

In this control panel, you can change the year, month, date, time, time zone, or select 
automatic adjust for Daylight Savings Time. To set or change the date and time:

Icon

Name

Description

Disabled Icon

Indicates that the Bluetooth has been disabled.

Unpaired Icon

Indicates that the Bluetooth radio is on but the device 
is currently not paired to another.

Paired Icon

Indicates that the Bluetooth radio is on and the 
device is paired with at least one other device.

Discoverable

Indicates that the device is discoverable by other 
Bluetooth devices.

Содержание Pegaso













































































































































































Отзывы:

Нет отзывов