Datalogic Pegaso, Руководство по продукции

Страница: 157 / 172

Product Reference Guide H-1
Appendix H
Glossary
Many definitions for this Glossary were taken directly from the Microsoft Developer’s
Network website at
http://msdn.microsoft.com/library/default.asp .
1D bar code
A traditional linear bar code. The code itself contains no information about the
item to which it is assigned but represents a string of identifying numbers or let-
ters.
2D bar code
Two-dimensional (2D) bar codes permit the encoding of information about an
item in addition to an identifying code. Two axes, or directions, are used for
recording and reading the codes and the bar size is reduced, increasing the
space available for data.
4-way rocker key
Refer to "navigation key".
active notification
The state of a user notification from the time the user is notified until the user
handles the event.
active window
The window in which a user is currently working or directing input. An active
window is typically on top of the Z order and is distinguished by the color of its
title bar.
ActiveSync
Microsoft Windows Communication application that synchronizes a Windows
CE device with a Microsoft Windows-based host PC. ActiveSync can use RS-
232, USB, and Wireless networks.
AP Access Point used for RF applications.
ASCII
American Standard Code for Information Interchange; a code for information
exchange between computers made by different companies; a string of 7 binary
digits represents each character; used in most microcomputers. Any member of
the standard code for representing characters by binary numbers. Refer to
Table F-5 on page
F-15
.
AutoCAB
The AutoCAB program allows the Pegaso to automatically reinstall selected
applications when the terminal is cold reset. When the Pegaso is rebooted, the
AutoCAB program runs automatically and determines if it is a warm or cold
reset.
AutoCE
The AutoCE program allows the user to create a list of applications to run when
the Pegaso is rebooted. Each application may be designated to run only on a
cold reset, or on both warm and cold resets. The applications run sequentially,
allowing interdependencies to be handled.
Batch units
Batch Pegaso units are synchronized and updated using Microsoft ActiveSync
software and a dock for communication with the host PC.