manualshive.com logo in svg

Datalogic Pegaso, Руководство по продукции, Страница: 54 / 172

Поделиться
Скачать
Datalogic Pegaso Скачать руководство пользователя страница 54

3-8

Pegaso™ Industrial PDA with Windows

®

 CE

Firmware Update Utility

The Pegaso is equipped with a field upgradeable firmware mechanism. Firmware 
updates for the Pegaso are uploaded to the Datalogic Mobile website 

(

www.mobile.data-

logic.com

). 

After you have downloaded the desired update, there are several ways you 

can update the firmware on the Pegaso. 

•

Use the Falcon Management Utility (FMU) if you have multiple units to update. 
Refer to the 

FMU User’s Guide

 on the Product CD included with your Pegaso for 

more information.

•

If FMU is not available or you have only a few units to update, use the Firmware 
Update Utility (FUU), described below, to install or update the firmware using an 
ActiveSync connection. Refer to "Installing & Setting Up Microsoft ActiveSync" 
on page 

4-1

 for more information.

FUU can also be used to restore the firmware onto a Pegaso that has become corrupted, 
such as would happen if the unit were powered down during an ActiveSync firmware 
update. See "Restoring Pegaso Firmware" on page 

3-11

.

The following sections provide procedures for the retrieval and installation of the most 
current firmware image onto a Pegaso.

Retrieving a Firmware Image Update

The following instructions use Internet Explorer to retrieve the most current firmware 
image.

1. Launch Internet Explorer on your PC and navigate to 

www.mobile.datalogic.com.

2. Navigate to the 

Downloads

 section of the website.

3. Select the product, desired language, and software updates. Click 

Go!

4. Select the file you want to download, then click 

Save

 and navigate to the location 

where you want to save the firmware files. 

5. Click 

Save 

again to begin copying the files to your local machine (or local network 

location).

Installing FUU on the Host PC

The Firmware Update Utility (FUU) provides administrators with a field upgrade 
mechanism. You must have Microsoft

® 

ActiveSync already loaded and running on the 

host PC to use FUU. Refer to 

"Installing & Setting Up Microsoft ActiveSync" on page 

4-1

 

and 

"Using ActiveSync" on page 

4-5

 

for more information about ActiveSync.

Prior to installing FUU, you must remove any previous versions of FUU installed on the 
host PC. 

Содержание Pegaso













































































































































































Отзывы:

Нет отзывов