Datalogic Magellan 1100i, Руководство по продукции

Страница: 37 / 208

Cell Phone Mode
Product Reference Guide
29
Cell Phone in Target Mode
This feature sets the reader’s Cell Phone Mode when it is in Target Mode:
NOTE
This feature is only available when Cell Phone Mode is enabled.
No Cell Phone Mode — Will not read cell phone labels when in Target Mode.
Auto Detection Cell Phone Mode — Automatically detects cell phone labels and shifts to
Cell Phone Mode when in Target Mode.
Always Enter Cell Phone Mode — The reader will always enter Cell Phone Mode when-
ever it is in Target Mode.
Follow these instructions to configure this feature:
1. Determine which mode is desired from the selections above.
2. Scan the START barcode to place the scanner in Programming Mode.
3. Scan the two barcodes which configure the desired mode.
4. Scan the END barcode.
START / END
PROGRAMMING BARCODES
Cell Phone in Target Mode = No Cell Phone Mode
[This is the DEFAULT setting]
No Cell Phone Mode #1
No Cell Phone Mode #2