background image

Datalogic S.r.l.

Via S. Vitalino, 13 
40012 Calderara di Reno — Italy
Tel. +39 051 3147011
Fax +39 051 3147205 

©2017-2021 Datalogic S.p.A. and/or its affiliates

All rights reserved. Without limiting the rights under copyright, no part of this 
documentation may be reproduced, stored in or introduced into a retrieval system, 
or transmitted in any form or by any means, or for any purpose, without the express 
written permission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license

 

to reproduce and transmit this documentation for the purchaser's own internal 
business purposes. Purchaser shall not remove or alter any proprietary notices, 
including copyright notices, contained in this documentation and shall ensure that all 
notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic website

 

(www.datalogic.com). If you visit our website and would like to make comments or 
suggestions about this or other Datalogic publications, please let us know via the

 

"Contact" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that 
is complete and accurate, however, Datalogic shall not be liable for technical or 
editorial errors or omissions contained herein, nor for incidental or consequential 
damages resulting from the use of this material. Datalogic reserves the right to

 

change any specification at any time without prior notice.

Trademarks

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in

 

many countries, including the U.S.A. and the E.U.

All other trademarks and brands are property of their respective owners.

Patents

See 

www.patents.datalogic.com

 for patent list.

This product is covered by one or more of the following patents:

Utility patents: US7100824, US7246745, US7646887, US8267316

WEEE Statement

www.datalogic.com

This document is an addendum to the Quick Reference 
Guide (QRG) for this product. See the QRG for additional 
product information.

Intelligent Lighting and Camera Unit

LANEHAWK™ LH5000

REGULATORY ADDENDUM

©2017-2021 Datalogic S.p.A. and/or its affiliates. All rights 
reserved. Without limiting the rights under copyright, no part of 
this documentation may be reproduced, stored in or introduced

 

into a retrieval system, or transmitted in any form or by any 
means, or for any purpose, without the express written permis-
sion of Datalogic S.p.A. and/or its affiliates Datalogic and the Data-
logic logo are registered trademarks of Datalogic S.p.A. in many 
countries, including the U.S. and the E.U.

850044301            (Rev. C)            July 2021

Waste Electrical and Electronic Equipment 

 

(WEEE) Statement

English

For information about the disposal of Waste Electrical and Electronic Equipment 
(WEEE), please refer to the website at www.datalogic.com.

Italian

Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche

 

consultare il sito Web www.datalogic.com.

French

Pour toute information relative à l’élimination des déchets électroniques (WEEE), 
veuillez consulter le site internet www.datalogic.com.

German

Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) 
erhalten Sie auf der Webseite www.datalogic.com.

Spanish

Si desea información acerca de los procedimientos para el desecho de los residuos 
del equipo eléctrico y electrónico (WEEE), visite la página Web www.datalogic.com.

Portuguese

Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e

 

Eletrônicos (WEEE -Waste Electrical and Electronic Equipment), consultar o site web

 

www.datalogic.com.

Chinese

有关处理废弃电气电子设备 (

WEEE)

的信息, 请参考

Datalogic

公司的网站

www.datalogic.com

Japanese

廃電気電子機器

(

WEEE

)

の処理についての関連事項は

Datalogic

のサイト

 

www.datalogic.com

をご参照下さい。

REGULATORY INFORMATION

FCC

This equipment has been tested and found to comply with the limits for a

 

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

 

designed to provide reasonable protection against harmful interference in a

 

residential installation. This equipment generates uses and can radiate radio

 

frequency energy, and if not installed and used in accordance with the

 

instructions, may cause harmful interference to radio communications. 
However, here is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

 

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Canada

Innovation, Science and Economic Development Canada ICES-003 Class B

 

Compliance statement:   CAN ICES-3(B)/NMB-3(B). 

Laser Safety

Europe/International

LASER

1

IEC60825-1:2014 © IEC 2014.

Caution Statements — Class II for USA/Canada

ENGLISH

This scanner is certified in the U.S. to conform to the requirements of DHHS/CDRH

 

21CFR Subchapter J. Maximum output radiation 1mW. Emitted wavelength 660 nm.
Class I and Class II products are not considered to be hazardous. The scanner contains 
internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum

 

limits as set forth in the above regulations. The scanner is designed so that there is no

 

human access to harmful laser light during normal operation, user maintenance or 
during prescribed service operations.

Caution

Use of controls or adjustments or performance of procedures other than those

 

specified herein may result in hazardous laser light.

Do not attempt to open or otherwise service any component in the optics cav-
ity. Opening or servicing any part of the optics cavity by unauthorized person-
nel may violate laser safety regulations. The optics system is a factory only 
repair item.

FRENCH

Ce scanner est certifié conforme à la norme DHHS/CDRH 21CFR sous-chapitre J. 
Rayonnement de sortie maximale 1mW. Longueur d'onde émise 660 nm.
Les produits de classe I et de classe II ne sont pas considérés dangereux. Le scanner 
contient une diode laser visible (VLD) dont les émissions ne dépassent pas les limites 
prescrites dans les normes précitées. Le scanneur est conçu de façon à ce qu’il ne soit 
pas possible d’accéder à la lumière laser pendant l’utilisation normale, l’entretien par 
l’utilisateur et les fonctions de maintenance prescrites.

Attention

L’utilisation de procédures de contrôle, réglage ou utilisation autres que celles 
spécifiées dans ce document peut entraîner une exposition dangereuse à la

 

lumière du laser.

Ne pas essayer d’ouvrir ni de réparer les composants de la cavité optique. 
L’ouverture ou la réparation d’une partie de la cavité optique par une personne

 

non qualifiée peut entraîner la violation des règles de sécurité relatives au

 

laser. Le système optique ne peut être réparé qu’en usine.

PRODUCT LABELING

The figures below show the general shape and position of the labels located

 

on the intelligent lighting and camera unit (ILCU).

Power Requirements

AC Power Requirements

AC Input: 100 - 240 VAC, 50-60 Hz

Power Consumption: Operating (Nominal): 9 Watts

Power Over Ethernet Requirements

Complies with IEEE 802.3af-2003 and units shall be connected only to POE

 

networks without routing to outside the store environment.
Power Consumption (Nominal): 10 Watts

NOTE

Labels are shown to illustrate their location only. Please view the 
labels on your product for actual details.

FRONT

Laser Caution Label

PO
W

ER

U

S

B

P

oE

AU

X

Regulatory/
Serial Number Label

BACK

Отзывы: