14
1. Press the textile trigger on the wearable in order to activate the red cros-
shairs.
2. Aim HandScanner crosshairs on the barcode and scan.
Example Barcode
Content: “Datalogic”
RESULT
HandScanner lights up green. You can hear a beeping sound and feel a short vibration. HandScanner has
scanned the example barcode and transmitted it to the end device.
6
th
Step: Disconnect HandScanner
Disconnect HandScanner from the Gateway
Place HandScanner in the Charging Station.
RESULT
HandScanner is disconnected from the Gateway and can be connected to a new one.
Disconnect the Connection Cable from the Gateway
Disconnect the connection cable out of the Micro USB socket.
RESULT
The LED of the Gateway no longer lights up green. The connection cable is disconnected from the Gateway.
NOTE
This will cause ALL paired devices to disconnect from the Gateway.
