Datalogic Gryphon I GM440 Series Скачать руководство пользователя страница 270

Страница: 270 / 350

Enter/Exit Programming Mode

260

Gryphon™ I GD44XX/GBT4400/GM440X

STAR Radio Transmit Mode

Specifies the transmission protocol for Star communications.
Options are:

• ACK from cradle to scanner — signals a good transmission as soon as

the Base Station receives a label

• ACK when sent to host — scanner signals a good transmission as soon

as the Base Station has sent the label to the host

• ACK from host — scanner signals a good transmission as soon as the

Base Station has sent the label to the host and host has replied with an

acknowledge message.

ACK from cradle

ACK when sent to host

ACK from host

The Base Station can receive a host message only if Host Com-
mands Obey/Ignore (page 35) is set to Ignore.

ACK from host works only for RS-232 or USB-COM interfaces with

ACK/NACK disabled. If ACK from host is configured with any other
interface conditions, it works like ACK when sent to host.

See

"Message Formatting"

on page 307 for details.

DEFAULT

Содержание Gryphon I GM440 Series































































































































































































































































































































































Результаты поиска

Содержание Gryphon I GM440 Series

Отзывы:

Datalogic Gryphon I GM440 Series, Руководство по продукции, Страница: 270 / 350

Результаты поиска

Содержание Gryphon I GM440 Series

Отзывы: