Datalogic Gryphon I GFS4400, Руководство по продукции

Страница: 285 / 324

Technical Specifications
Product Reference Guide
283
Programming Mode
-
The following indications ONLY occur when the reader is in Programming
Mode
.
Indicator Description LED Beeper
Label Programming
Mode Entry A valid programming label
has been scanned.
LED blinks continu-
ously
Reader sounds four
low frequency beeps.
Label Programming
Mode Rejection of
Label
A label has been rejected. N/A
Reader sounds three
times at lowest fre-
quency and current
volume.
Label Programming
Mode Acceptance of
Partial Label
In cases where multiple
labels must be scanned to
program one feature, this
indication acknowledges
each portion as it is suc-
cessfully scanned.
N/A
Reader sounds one
short beep at highest
frequency and cur-
rent volume.
Label Programming
Mode Acceptance of
Programming
Configuration option(s)
have been successfully pro-
grammed via labels and the
reader has exited Program-
ming Mode.
N/A
Reader sounds one
high frequency beep
and 4 low frequency
beeps followed by
reset beeps.
Label Programming
Mode Cancel Item
Entry
Cancel label has been
scanned.
N/A
Reader sounds two
times at low fre-
quency and current
volume.
Error Codes
Upon startup, if the reader sounds a long tone, this means the reader has not passed its automatic
Selftest and has entered FRU (Field Replaceable Unit) isolation mode. If the reader is reset, the
sequence will be repeated. Press and release the trigger to hear the FRU indication code.
The following table describes the LED flashes/beep codes associated with an error found.
Number of LED Flashes/
Beeps
Error Corrective Action
1 Configuration
Contact Helpdesk
for assistance
2 Interface PCB
6 Digital PCB
11 Imager