Datalogic Gryphon I GFE4500, Руководство по продукции

Страница: 88 / 312

ENTER/EXIT PROGRAMMING MODE READING PARAMETERS
74
GRYPHON™ GFS4500
Serial Start Character
See page
page 236
in “References” for more information.
Serial Stop Character
See page
page 236
in “References” for more information.
Select Serial Start Characters
$CSTON
To configure this feature scan the ENTER/EXIT PRO -
GRAMMING MODE barcode above, then the barcode
at left, followed by the digits (in hex) from the Alpha -
numeric characters in Appendix E, Keypad repre -
senting your desired character(s). End by scanning
the ENTER/EXIT barcode again
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

0x02 = Serial Start Character is [02 STX]
Select Serial Stop Characters
$CSTOF
To configure this feature scan the ENTER/EXIT PRO -
GRAMMING MODE barcode above, then the barcode
at left, followed by the digits (in hex) from the Alpha -
numeric characters in Appendix E, Keypad repre -
senting your desired character(s). End by scanning
the ENTER/EXIT barcode again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

0x03 = Serial Stop Character is [03 ETX]
NOTE: The Serial Start/Stop Characters must be different and must not
contain reserved characters (see
Appendix F, Reserved Characters
)