Datalogic Gryphon I GFE4500, Руководство по продукции

Страница: 29 / 312

PRODUCT REFERENCE GUIDE
15
CHAPTER 3
CONFIGURATION WITH BAR CODES
This and following sections provide programming bar codes to configure your reader by
changing the default settings. For details about additional methods of programming,
see "
Customizing Configuration Settings" on page 12
.
CONFIGURATION PARAMETERS
Once the reader is set up, you can change the default parameters to meet your applica -
tion needs. Refer to
Standard Defaults, starting on page 259
for initial configuration in
order to set the default values and select the interface for your application.
The following configuration parameters are divided into logical groups, making it easy to
find the desired function based on its reference group.
Interface Configuration:
•
RS-232 Standard Settings, starting on page 19
•
RS-232/USB-COM Settings, starting on page 24
•
Keyboard Interface, starting on page 31
•
USB-OEM Interface, starting on page 58
Parameters common to all interface applications:
•
Global Prefix/Suffix, starting on page 61
•
Data Format, starting on page 60
gives options to control the messages sent to the
Host system by selecting parameters to control the message strings sent to the
handheld.
• Reading Parameters, starting on page 71
controls various operating modes and
indicators status functioning.
NOTE: You must first enable your Gryphon to read bar codes in order to use
this section. If you have not done this, go to
Setup, starting on page 5
and
complete the appropriate procedure.
NOTE: In the following sections, text shown with a green star indicates a
factory default value.

This is an example of a default value.