Datalogic Gryphon I GD4400, Руководство по продукции

Страница: 41 / 350

Product Reference Guide 39
Chapter 3
Configuration Using Bar Codes
This and following sections provide programming bar codes to configure
your reader by changing the default settings. For details about additional
methods of programming, see " Configuration Methods" on page 8 .
You must first enable your reader to read bar codes in order to use
this section. If you have not done this, go to
Setup, starting on
page 17
and complete the appropriate procedure.
Configuration Parameters
Once the reader is set up, you can change the default parameters to meet
your application needs. Refer to "Standard Defaults" starting on page 319 for
initial configuration in order to set the default values and select the interface
for your application.
The following configuration parameters are divided into logical groups,
making it easy to find the desired function based on its reference group.
Interface Configuration:
• "RS-232/USB-Com Interfaces" on page 48
• "Keyboard Settings" on page 67
Parameters common to all interface applications:
• "Data Format" on page 87 gives options to control the messages sent to
the Host system.
• "Reading Parameters" on page 101 control various operating modes
and indicators status functioning.
Symbology-specific parameters:
• "1D Symbologies" on page 123 provides configuration of a personal-
ized mix of 1D codes, code families and their options.
• "2D Symbologies" on page 215 provides configuration of a personal-
ized mix of 2D codes, code families and their options.
You must first enable your reader to read bar codes in order to use
this section. If you have not done this, go to
Setup, starting on
page 17
and complete the appropriate procedure.