Datalogic Gryphon I GD4132, Руководство по продукции

Страница: 111 / 354

ENTER/EXIT PROGRAMMING MODE
Product Reference Guide 109
Flash On Time
This feature specifies the ON time for the indicator LED while in Flash Mode.
The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100
millisecond increments.See page 308 in “References” for detailed information
on setting this feature.
Select Flash ON Time Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
10 = Flash is ON for 1 Second
Flash Off Time
This feature specifies the OFF time for the indicator LED while in Flash Mode.
The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100
millisecond increments. See page 309 in “References” for detailed information
on setting this feature.
Select Flash OFF Time Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
06 = Flash is OFF for 600ms