Datalogic Gryphon GM44 Series страница 26 Скачать руководство пользователя | Manualshive

Страница: 26 / 69

background image

Selecting the Interface Type

Quick Reference Guide

17

Selecting the Interface Type

Upon completing the physical connection between the reader
and its host, proceed directly to Interface Selection (below) for
information and programming for the interface type the read-
er is connected to (for example: RS-232, Keyboard Wedge,
USB, etc.) and scan the appropriate bar code to select your sys-
tem’s correct interface type.

Interface Selection

Each reader version will support one of the following sets of
host interfaces:

General Purpose Versions:

RS-232, RS-232 OPOS, USB, Key-

board Wedge, Wand.

Retail Point of Sale Versions :

RS-232, RS-232 OPOS, USB,

IBM 46XX.
Information and programming options for each interface type
are provided in this section. For defaults and additional infor-
mation associated with each interface, proceed to the corre-
sponding chapter in the Gryphon™ 44XX PRG.

Configuring the Interface

Scan the programming bar code which selects the appropriate
interface type for the system the reader will be connected to.

Unlike some other programming features and options,
interface selections require that you scan only one pro-
gramming bar code label. DO NOT scan an ENTER/EXIT bar
code prior to scanning an interface selection bar code.

Some interfaces require the scanner to start in the dis-
abled state when powered up. If additional scanner con-
figuration is desired while in this state, pull the trigger
and hold for 5 seconds. The scanner will change to a state
that allows programming with bar codes.

«
...
24
25
26
27
28
...
»

Содержание Gryphon GM44 Series






































































Отзывы:

Нет отзывов

Похожие инструкции для Gryphon GM44 Series

Бренд: Hama Страницы: 5

Infinea Tab 2 LPT

Бренд: Infinite Peripherals Страницы: 26

Бренд: YOKO Страницы: 70

Бренд: Climax Technology Страницы: 4

Бренд: SAMSys Страницы: 36

Бренд: Stanley Страницы: 48

Бренд: HP Страницы: 57

Бренд: ZKTeco Страницы: 7

UHF10F Pro Reader

Бренд: ZKTeco Страницы: 25

Fixed Mount CCD Barcode Scanner

Бренд: Tysso Страницы: 7

Бренд: Microscan Страницы: 132

Бренд: SICK Страницы: 100

Бренд: Viking Страницы: 20

Бренд: Invengo Страницы: 46

RFU630-131 Series

Бренд: SICK Страницы: 10

Бренд: SICK Страницы: 40

Lector85 Flex Series

Бренд: SICK Страницы: 48

Бренд: Annlov Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды