Datalogic Gryphon BT4100, Руководство по продукции, Страница: 320 / 370

References
318 Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Display Settings
Display Mode
The user can control the reader display behavior according to the following selections:
Local Echo mode: When a barcode is read with the reader:
• The code is sent to the Host.
• The reader display is cleared.
• The code is also sent to the reader display (Local Echo).
• The cursor is positioned after the last printed character on the reader display.
Normal mode: When a barcode is read with the reader:
• The code is sent to the Host.
• The reader display is not cleared. Therefore if any previous data was displayed on the
reader screen it remains.
• There is no Local Echo to the reader display.
Clear Display After Decode mode: When a barcode is read with the reader:
• The code is sent to the Host.
• The reader display is cleared. Therefore if any previous data was displayed on the reader
screen it is cancelled and the screen remains blank.
• There is no Local Echo of the code to the reader display.
Host messages sent to the reader are always written to the reader display.
RF Features
Configuration Update
Automatic Configuration Update
When this feature is enabled, the base station and reader will keep their configurations
synchronized. If a reader's configuration is altered by reading programming labels, this change is
automatically transferred and updated in a linked base station. Likewise, if the base station's
configuration is changed using Aladdin or by host commands, then the reader's configuration
will automatically be updated if this feature is enabled.
RF Address Stamping
Source Radio Address Delimiter Character
This option specifies the delimiter character to be placed between the label data and radio
address when address stamping is enabled.
This feature only applies if
"Source Radio Address Transmission"on
page 270
is enabled.