ENTER/EXIT PROGRAMMING MODE
RS-232/USB-COM INTERFACES
48
GRYPHON™ I GD/GBT/GM4500
Disable Character
Specifies the value of the RS-232 host command used to disable the reader.
ASCII characters or any hex value from 0 to 0xFF can be selected. See "
for more detailed programming instructions.
Enable Character
Specifies the value of the RS-232 host command used to enable the reader.
ASCII characters or any hex value from 0 to 0xFF can be selected. See "
for more detailed programming instructions
Setting to previously defined characters such as XON, XOFF, or host com-
mands conflicts with normal operation of these characters.
Select Disable Character Setting
$CR2DC
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
0x44 = Disable Character is ‘D’
Setting to previously defined characters such as XON, XOFF, or host com-
mands conflicts with normal operation of these characters.
Select Enable Character Setting
$CR2EC
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
0x45 = Enable Character is ‘E’
Содержание Gryphom 4500 Series
Страница 94: ...80 GRYPHON I GD GBT GM4500 CONFIGURATION IBM 46XX INTERFACE SECTION CONTENTS IBM 46xx Interface Options ...
Страница 338: ...SAMPLE BARCODES 324 GRYPHON I GD GBT GM4500 Interleaved 2 of 5 Code 32 Codabar Code 93 Code 11 12345678901231 ...
Страница 341: ...SAMPLE BARCODES PRODUCT REFERENCE GUIDE 327 2D Barcodes continued QR Code 35900G9 Micro QR Code 123456 UCC Composite ...
Страница 343: ...PRODUCT REFERENCE GUIDE 329 1 2 3 4 5 6 7 8 9 ...