manualshive.com logo in svg

Datalogic Falcon X3, Руководство пользователя

Поделиться
Скачать
Datalogic Falcon X3 Скачать руководство пользователя страница 75

USE AND FUNCTIONING 

4 

respond within five seconds, the device will power off, but leave features as they 
were. 
 
 

4.11 HEAT 

MANAGEMENT 

 
The purpose of heat management is to automatically reduce the heat generated 
by the device features in order to allow battery charging to take place when 
needed. It does not have a control panel UI to configure it. Instead, its behavior 
can be configured through changes to the registry. This choice is made to 
disguise the need by our current products for heat management when used in a 
Powered Mobile Dock. 
 
Heat management is only engaged when enabled and the device is attached to 
a DC power source (dock or USB charger). When engaged, the heat manager 
is allowed to disable the following features to reduce heat. The features are 
listed in priority order. Items listed first will be disabled before others. 

1. Backlight 

2. WiFi 

3. 

Cellular Phone (Data and Voice) 

4. GPS 
 
 

User feedback 

 
When the heat manager has decided to disable one or more features, the 
battery status page of the Power control panel applet will display the status 
message "Charging Override" to reflect the fact that the heat manager is taking 
action. In addition, when the heat manager first begins to disable a feature to 
reduce heat, then the following pop-up message will be displayed: 
 

 

 

If the user selects "OK", then heat management continues normally and begins 
to disable features to reduce heat. If the user selects "Cancel", then no features 
are disabled and heat management is disabled until the next change in profile 
(device is attached again to a DC power source). 
 

69

 

Содержание Falcon X3
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды