Datalogic DSM0400, Руководство по продукции

Страница: 159 / 252

Enter/Exit Programming Mode
Product Reference Guide 151
Code 93 Set Length 2
This feature specifies one of the barcode lengths for Code 93. Length 2 is the
maximum label length if in Variable Length on page 93 Mode, or the second fixed
length if in Fixed Length on page 93 Mode. Length includes the barcode’s check,
data, and full-ASCII shift characters. The length does not include start/stop
characters. The length can be set from 1 to 50 characters. A setting of 0 speci-
fies to ignore this length (only one fixed length). For more detailed program-
ming instructions see, "Set Length" on Chapter 4, References .
Table 20 provides examples for setting Length 2.
Table 20. CODE 93 Length 2 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (Ignore This
Length)
07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 2 SETTING
4
Scan Two Characters From
Appendix C
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters