Datalogic DLR-BT001 Series, Краткое руководство пользователя

Страница: 16 / 32

Using the DLR-BT001
6 DLR-BT001-XX
Charging the Battery
The DLR-BT001-XX unit is supplied with a USB cable and a power supply
for battery charging. When the reader is in charge, the display lights up
and shows the blinking charge indicator. A fixed indication "
charge 100%
"
informs when the charge is complete.
USB connector
A micro USB Type B socket connector located in the bottom side of
DLR-BT001-XX can be used to connect the reader to a USB host port or
to an AC/DC battery charger.
Non-removable Battery
Due to its nature and dimensions, DLR-BT001 has a fixed rechargeable
battery. It is strictly forbidden to remove it for charging or any other pur-
pose.
The charge will be performed using exclusively the micro USB connector
(refer to "Accessories" on page 7).
WARNING
If the battery is completely low, the display may
not turn on when the charger is connected. In this
case, leave the reader connected to the charger for
at least 5 minutes, then disconnect the USB cable,
perform the reset procedure (refer to paragraph
"Reset" on page 11), switch off the reader by press-
ing the power button and then connect the USB
cable again.
WARNING
Any attempt to access or replace the battery will
cause an infringement of the warranty. In case of
battery malfunction, call Datalogic technical assis-
tance.