Datalogic DL-Axist, Краткое руководство пользователя, Страница: 20 / 52

Battery
16 DL-Axist™
Replace the Battery
To replace the battery pack, follow the steps below:
1. Turn off the DL-Axist, or put it in Swap Battery mode (see "Swap
Battery" on page 22 ).
2. Rotate the latches to the open position:
3. Grab the battery cover by the sides and lift it out of the way:
4. Remove the battery by pulling the tab on the bottom of the
battery:
5. Insert the new battery pack into the slot (see “Install the
Battery” on page -9 , steps 3 to 6).