Mounting the BC9xx0 Cradle
Quick Reference Guide
3
•
Desktop mount bracket has ribs to keep the scanner in place when
the cradle is horizontal
•
Wall mount bracket contains bosses to keep the scanner in place
when the cradle is vertical.
To change the Bracket:
1.
Remove the screw holding the Bracket in place. Retain the screw for
re-use.
2.
Carefully lift off the Bracket.
3.
Install the other bracket by first slipping the end tab into place on
the base station, then easing the tabs (shown in
)
into place on the sides.
4.
Replace the screw to secure the Bracket to the Base Station.
Figure 2. Changing the Bracket
3
