Datalogic AV7000, Руководство по продукции

Страница: 207 / 352

PRODUCT REFERENCE GUIDE
193
Modify Settings | Device Settings | <Camera name> | Imaging
Use the Imaging window to configure how images are handled by the selected camera.
To view the Imaging window:
1. In the menu tree under
Modify Settings,
navigate to
Device Settings | <Camera
name> | Imaging.
The
Imaging
window opens.
2. View the following barcode reader information:
Illumination Settings
Illumination Pre-Power Enable
Select the check box to enable. This puts the illumination in a power saving mode that allows it
to power up to full mode faster.
Illumination Stay-On Time
Enter a value in seconds. This determines how long the illumination will stay on after the end
of the trigger cycle.
If Direct Encoder is enabled in Modify Settings | Global Settings | Operating Mode (see
section ), the Illumination Stay-On Time needs to be greater than the amount of time the
conveyor will be stopped in a start/stop configuration.