Datalogic AV7000, Руководство по продукции

Страница: 178 / 352

E-GENIUS
164
AV7000 LINEAR CAMERA
Output Format | Standard Formatter
Use the Standard Formatter to set up standard code parameters for output messages.
To edit the Standard Formatter settings:
1. In the menu tree under Modify Settings, navigate to G
lobal Settings | Output For-
mat | Standard Formatter.
The
Standard Formatter
window opens.
2. Enter the appropriate information in the form as described below:
Header
Click to activate the Text Entry Tool and create a header string. Headers (up to 128 bytes) can
be defined and transmitted as a block preceding the barcode(s). Characters from NUL (00H) to
~ (7EH) can be used.
Terminator
Click to activate the Text Entry Tool and create a terminator string. Terminators (up to 128
bytes) can be defined and transmitted as a block following the barcode(s). Characters from NUL
(00H) to ~ (7EH) can be used.
Separator
Click to activate the Text Entry Tool and create a separator string. Separators (up to 128
bytes) can be defined. Characters from NUL (00H) to ~ (7EH) can be used.
The Data Packet Separators (up to 128 bytes) are used to separate barcodes in the reading
phase. For this reason, it is very useful when the Multi Label parameter has been enabled. If
selected, they occur within the Code Field and are transmitted after each decoded code.
Multiple Label Separator
Click to activate the Text Entry Tool and create a separator string. Separators (up to 128
bytes) can be defined. Characters from NUL (00H) to ~ (7EH) can be used.
The Data Packet Separators (up to 128 bytes) are used to separate barcodes in the reading
phase. For this reason, it is very useful when the Multi Label parameter has been enabled. If
selected, they occur within the Code Field and are transmitted after each decoded code
Field Type
Select Variable Length or Fixed Length from the drop-down list. The code field length can be
(in number of characters/digits) can be specified in order to be accepted for decoding:
•
Variable Length:
All possible code field lengths (in number of characters/digits) allowed for
the code selected are accepted.
•
Fixed Length:
Only the length defined by the Code Field Length parameter is accepted.
Field Length
Enter a length value in the filed provided. Only for fixed length format.
Fill Direction
Select
Left
or
Right
from the drop-down list. Only for fixed length format.