Datalogic AV7000, Руководство по продукции

Страница: 147 / 352

BARCODE CONFIGURATION |SINGLE LABEL
PRODUCT REFERENCE GUIDE
133
BARCODE CONFIGURATION |SINGLE LABEL
When
Single Label
has been selected from the
Code Combination
drop-down list, the
Barcode Configuration window reveals related input fields.
1. Enter the appropriate information in the form as described below:
Minimum 1D Code Height
Enter the
Minimum Code Height
in the field provided (mm [in]).
Code Combination
Single Label has been selected.
No Read Message See “Understanding Barcode Configurations” on page 130
Select
Disable No Read Message, Global No Read Message
, or
Local No Read(s) Message
from the drop-down list. The
No Read
condition occurs whenever a code cannot be read or
decoded.
•
Disable No Read Message:
The No Read Message is not transmitted.
• Global No Read Message: The No Read String will be sent if the barcode reader is unable
to decode one or more barcodes in the reading phase. When multiple codes are enabled in
the
Barcode Settings Table,
and not all of the codes are read within a trigger cycle, a single
Global No Read
message is transmitted to the host.
•
Local No Read(s) Message:
This option is used when Standard Multi Label or Code
Collection is selected. A Local No Read message is a configurable No Read message
associated with each individual code enabled in the Barcode Settings Table.
No Read String (max. 128 chars)
Click to activate the Text Entry Tool and create a string to be displayed when G lobal No
Read Message
is selected from the
No Read Message
drop-down list.
Multi-Filter Settings
Strip Filter
Select the check box to display the
Strip Filter
options. This filter, when enabled, allows the
elimination of characters not managed by the host.
Strip All Non Printable Chars
Select the check box to remove all non- printable ASCII characters from the code (000-020 and
127).
Char(s) to be Stripped
Click to activate the Text Entry Tool and enter specific characters to be stripped from the
code. Click Submit to save your text to the origin window text field, or click Cancel to return to
origin window without transferring text.