Datalogic AV7000, Руководство по продукции

Страница: 105 / 352

GETTING STARTED
PRODUCT REFERENCE GUIDE
91
2. Type
adapter
in the search box, and then from the results, under Network and
Sharing Center, click View network connections .
3. Right-click
Local Area Connection
, and then select
Properties
.
4. Select the Networking tab. Under This connection uses the following items,
click
Internet Protocol Version 4 (TCP/IPv4)
, and then click
Properties
.
5. Select Use the following IP address . In the IP address field, type the first 3 octets of
the IP address of the unit.
6. For the last octet, type a number that differs from the last octet in the AV7000’s IP
address. The actual number used is not important as long as it does not match
that of the AV7000.
Example: If the camera’s IP Address is 192.168.0.145, set your PC’s IP Address to
192.168.0.146.
7. In the
Subnet mask field
, type 255.255.255.0
8. Click Okay .
Windows 10
1. In the search box, type Network and Sharing Center
2. Select
Change adapter settings
3. Select the Local Area Connection to change, right click and select Properties.
4. Select
Internet Protocol Version 4 (TCP/IPv4)
and
Properties
.
5. Select Use the following IP address. In the IP address field, type the first 3 octets of
the IP address of the unit.
6. For the last octet, type a number that differs from the last octet in the AV7000’s IP
address. The actual number used is not important as long as it does not match
that of the AV7000.
Example: If the camera’s IP Address is 192.168.0.145, set your PC’s IP Address to
192.168.0.146.
7. In the Subnet mask field, type 255.255.255.0
8. Click Okay .
To log out of the e-Genius:
Click at the upper right corner of the e -Genius window to Log Out . When logged
out, the
Log On
window will appear.