Datalogic AV500, Руководство по продукции

Страница: 285 / 324

SETTING UP THE DM3610 DIMENSIONER
PRODUCT REFERENCE GUIDE
265
4. Referencing the direction of conveyor travel, view the Dimensioner from an
upstream position. Determine if the connectors located on the side of the unit
face left or right, see the image below.
5. From the Connector Position drop ‐ down, select Left or Right .
6. Click Update to save the changes.
Adjusting DM3610 Left Focus Offset
1. Position a test box with a known width in the dimensioner line(s) so the side of the
box is at the RIGHT side AV500 far working distance as specified by the applica ‐
tion’s installation drawing. In this example we will be using a box with a 3” width.
2. In the menu tree under Diagnostics , click Focus Setup . The Focus Setup Windows
opens.
When working with a DC3000 multi-head system, you must select a focus data source on
the DC3000 Tach/Trigger/Transmit page. In applications involving side read cameras,
select Head 1 and Head 2. For top read only applications, selecting a single head will suf-
fice.
When working with a DC3000 multi-head system, the text box must intercept all dimen-
sioning lines
When working with a DC3000 based Dimensioning system, please allow time for the con-
stant tach signal to synchronize between the Master and Slave units.