Datalogic AV500, Руководство по продукции

Страница: 284 / 324

FOCUSING DEVICE SETUP
264
AV500 2D CAMERA
6. Enter the Focus Transmit Interval . This is the amount of milliseconds between
data transmissions. It defines the frequency of the data transmissions from the
DM3610(s).
7. Click Update to save the changes.
8. The distance between the far working distances of the cameras is considered the
“Conveyor Width” and must also be entered in the Conveyor Width field in AV500
Global Settings | Operating Mode.
Understanding DM3610 Focusing and AV500 System Orientation
The goal of this focusing process is to correlate the DM3610 zero reference points to the
far working distances of the cameras.
The DM3610 Left and Right Offsets will focus the DM3610 at the Far Working Distances
(Left and Right) of the side AV500 cameras. These values are not necessarily the same.
Reference the system application drawings for the exact prescribed Far Working Dis ‐
tances of each camera.
1. Navigate to Diagnostics | Focus Setup . The Focus Setup window opens,
2. From the Tachometer drop ‐ down list, select Constant .
3. Verify that the values displayed for Left Offset, Right Offset, and Height Offset are
all set to 0.
If you navigate away from the Focus Setup page, the Constant Tach setting will automati-
cally reset to Hardware Tach. Reset it, to continue the focus setup process.