Datalogic 937800000, Руководство по продукции

Страница: 48 / 188

INTRODUCTION
34 MATRIX 120™
X-PRESS HUMAN MACHINE INTERFACE
X-PRESS is the intuitive Human Machine Interface designed to improve ease of installa-
tion and maintenance.
Status information is clearly presented by means of the five colored LEDs, whereas the
single push button gives immediate access to the following relevant functions:
Test Mode with bar graph visualization to check
static reading performance.
Focus (Aim) turns on the laser indicator to aim the
reader at the target.
The target should be
placed a few mm to the left and centered ver-
tically with respect to the aiming pattern
(cross).
Setup to self-optimize and auto-configure pho-
tometry parameters.
Learn to self-detect and auto-configure for read-
ing an unknown barcode (by type and length). Only
one symbology type can be saved using this
method. Performing Autolearn on a second sym-
bology will overwrite the first one.
X-PRESS Functions
Quick access to the following functions is provided by an easy procedure using the push
button:
1. Press the button (the Status LED will give a visual feedback).
2. Hold the button until the specific function LED is on (Test, Focus/Aim, Setup or
Learn).
3. Release the button to enter the specific function.
Once button is pressed, the cycle of LEDs activation is as follows:
Release button
Release button
to Exit
to enter Setup Mode to enter Learn Mode
Release button Release button
Release button Release button
to enter Focus/Aim Mode to enter Test Mode
 
 


(cycle)
to Exit