Sentry K350 hardware encrypted USB flash drive - User Guide
Change Password
Available for Login USER/ADMIN
This menu option changes the current password.
1. From the Configuration Menu, select and confirm
Change Password
.
2. Enter the new password and confirm with the Enter-button.
3. Re-enter the password, confirm with the Enter-button.
4. Upon successful completion, the device goes back to the Configuration Menu.
Set User
Available for ADMIN
This allows the administrator to either
Enable
or
Disable
a user role. When a user is created your
K350 will show a login mode selection screen upon the next power up. If
User
is selected upon
login, your K350 will force the user to create a user unlock password. The user will use this password
to unlock the device. The K350 user has a limited feature set compared to the administrator, see
NOTE:
The User profile is not available if SafeConsole is enabled for your K350.
Step-by-step Process to Set User
1. From the Configuration Menu, select and confirm
Set User
.
2. Select
Enable
and confirm with the Enter-button. In the example ‘DISABLE’ is selected.
Figure 1: Set User
3. Confirm with the Enter-button. Upon successful completion, the device goes back to the
Configuration Menu.
Step by step process for USER configuration
1. Power on K350.
2. Confirm login mode
User
(the default selection when the Set User is enabled) with the Enter-
button when prompted to select login mode.
© 2021 DataLocker Inc. All rights reserved.
9
