Sentry K350 hardware encrypted USB flash drive - User Guide
3. Connect and start working
• Select
MENU
to access all settings, such as enabling a user login. A white background with
black text on a selection denotes the current selection.
• To start working with your data in a regular way confirm
CONNECT
selection and plug the
drive into the host USB port as shown on the screen.
• The encryption is automatic. The K350 locks when it is unplugged from the host.
General Usage Best Practices - Password, Battery, IP67
• Use a strong
password
, keep it to yourself and be sure to remember it. Remote password
resets can be enabled if the device is managed by SafeConsole. If the device is not man-
aged, but there is both a Admin and User role active, the Admin can assist the User to reset
their password (while retaining the stored data).
• Only connect the K350 to USB ports. The K350 draws the correct amount of current (50mA)
from the USB port to charge the integrated Lithium-Ion
battery
even while in use. If the
battery
within the device is low, charge it by plugging it into a USB port for 30 minutes before using
the drive. If the device is left unused for several months the battery will drain slowly. K350
can also be unlocked using solely the power from the USB-port, should there be an unlikely,
unexpected, battery issue.
• The K350 is IP67-rated but must be completely dry before connecting to a computer.
© 2021 DataLocker Inc. All rights reserved.
6
