Sentry K350 hardware encrypted USB flash drive - User Guide
Using Standalone Logins
On the next unlock of your K350, you can select
Standalone
after you input your password to un-
lock in Standalone mode. When in Standalone mode, the Unlocker partition will not be mounted
to the host computer and the DataLocker Control Panel will not need to be executed.
1. Power on.
2. Select
Standalone
at the “Login Mode” prompt, confirm with Enter-button.
3. Confirm with Enter-button when you are prompted with the number of remaining Standalone
logins.
4. Select
Connect
, confirm with Enter-button to utilize the secure partition.
NOTE:
This will decrease the Currently Available count of Standalone logins by one.
To continue to use your K350 in the normal SafeConsole mode, select
SafeConsole
in step 2.
Note:
The
Currently Available
number of Standalone logins will be reset to zero if a SafeConsole
administrator remotely disables or factory resets your K350. Currently available will also be set back
to zero after a password reset or when the device is blocked by GeoFence.
Password Reset
If your K350 cannot be unlocked due to a forgotten password, a recovery password can be sent
by your SafeConsole administrator.
1. Power on K350 and input the recovery password.
© 2021 DataLocker Inc. All rights reserved.
18
