Sentry K350 hardware encrypted USB flash drive - User Guide
3. Press Enter-button to proceed from the “Please create your password” screen.
4. Enter the new password and confirm with the Enter-button.
5. Re-enter the password to confirm with the Enter-button.
6. Select and confirm
Connect
.
Access User data as an Admin
1. Power on.
2. Select Admin login mode, confirm selection with Enter-button, unlock with the admin pass-
word.
3. Connect. User data is accessible on the private partition.
Assist a user who forgot their password
The scalable method for remote password resets with an audit trail is available when managing
K350 with SafeConsole. If the K350 is not centrally managed and a User is activated, the following
procedure can be used.
1. User forgets the password.
2. Power off/on. Select login mode Admin, unlock with admin password.
3. Enter Configuration Menu and select Set User, select and confirm
Disable
. Power off/on.
4. Select login mode Admin, unlock again with Admin password.
5. Enter Configuration Menu and select Set User, select and confirm
Enable
. Power off/on.
6. Select login mode User, enter and confirm the new User password. Connect to confirm and
access your data.
SafeConsole
Available for ADMIN
NOTE
Once the device is connected to SafeConsole it will be permanently set to managed state. It
is not possible to return to an unmanaged state after the device once has become fully managed.
This option enables SafeConsole management for your K350. SafeConsole is a central manage-
ment console used to optionally manage K350 devices. Managed K350s require a Connection
Token upon initialization. The SafeConsole Connection Token is obtained by the System admin-
istrator through the Quick Connect Guide, located inside of the SafeConsole user interface.
SafeConsole requires a device license for activation. License sold separately.
Users without access to a Management Server, please contact sales:
SafeConsole offers several key features including audit logging, anti-malware services (license
sold separately), remote password reset, and more!
Enabling SafeConsole
1. From the Configuration Menu, Select
SafeConsole
, confirm with Enter.
2. Select
Enable
, confirm with Enter. The device goes back to the Configuration Menu.
3. Power off/on.
4. See
Registering your K350 to SafeConsole
to complete registration.
© 2021 DataLocker Inc. All rights reserved.
10
