Instruction / Installation Sheet
Cable Trench System
Part # CT-75-2P
Parts Included:
● (3) 15 in. Stackable Enclosure Box
● (1) 15 in. Stackable Enclosure Box w/ Open End Cap
● (1) 15 in. Stackable Enclosure Box w/ knockout End Cap
● (4) 15” Gangable Solid Cover
● (1) 15” Cover w/ Cable Pass-Through
Tools Needed:
● Phillips Head Screwdriver
● (10) Metal Wood Screws
4. Stack and Install Next Box
Slide the Stackable Enclosure Box (A) onto the Stackable Enclosure Box w/ knockout End Cap (C). Secure the Boxes together using six included Box
Screws (H) with a Phillips head screwdriver.
5. Installing Next Two Boxes
Repeat step 3 for the remaining two back boxes.
6. Stack and Install Next Box
Slide the Stackable Enclosure Box w/ Open End Cap (B) onto the top of the trench. Secure the Box to the stack with the remaining six Box Screws (H)
with a Phillips head screwdriver.
7. Installing the Screw Cover
Once you have run wires down through cable trench, you can place the drywall over the location, removing the cutout for the trench. Secure the
Cover w/ Cable Pass-Through (E) to the Stackable Enclosure Box w/ knockout End Cap (C). Secure the cover to the studs with the Screw Cover
Screws (G). Slide and secure the Gangable Solid Cover (D) incrementally to the trench.
8. Installing the End Caps
Snap on the Screw Cover End Caps (F) to the top and bottom covers.
Page 1 of 2
Installation Instructions:
1. Preparing the Wall
Cut out a space in the dry wall 75in. tall (or increments of 15in.) x 15 in wide.
2. Placing the Bottom Box
Place the Stackable Enclosure Box w/ knockout End Cap (C) between studs where the cables are intended to exit the trench.
3. Installing the Bottom Box
Secure the two tabs to the studs using Metal Wood screws (not included) and a Phillips head Screwdriver.
Parts Identification:
A- (3) 15 in. Stackable Enclosure Box
B- (1) 15 in. Stackable Enclosure Box w/ Open End Cap
C- (1) 15 in. Stackable Enclosure Box w/ knockout End Cap
D- (4) 15 in. Gangable Solid Cover
E- (1) 15 in. Cover w/ Cable Pass-Through
F- (2) Screw Cover End Caps
G- (20) Screw Cover Screws
H- (36) Box Screws
DataComm Electronics, Inc.
6349 Peachtree Street
Norcross, GA 30071-1725
888.223.7977
770.662.8205
www.DataCommElectronics.com
F
G
D
E
H
C
A
B
F
06/19/2018
