DM984 product family
CHAPTER 11. IPSAN CONFIGURATION
Name
Format
Description
<vid1>
Number (1-4094)
Outer VLAN ID of the native VLAN
<sprio>
Number (0-7)
Outer VLAN priority
<vid2>
Number (1-4094)
Inner VLAN ID of the native VLAN
<cprio>
Number (0-7)
Inner VLAN priority
Note:
In case the VLAN priority of the inner VLAN is 0 the definition of the
inner priority is optional. The priority of the outer VLAN must be given in order
to get the command working, even if it is 0.
Example with inner and outer priority 0:
DM4650(config-if-gpon-eth-uni-7/1/1/1)#native-vlan vlan 100
,
→
sprio 0 cvlan 50
DM4650(config-if-gpon-eth-uni-7/1/1/1)#
Example with inner and outer priority 1:
DM4650(config-if-gpon-eth-uni-7/1/1/1)#native-vlan vlan 100
,
→
sprio 1 cvlan 50 cprio 1
DM4650(config-if-gpon-eth-uni-7/1/1/1)#
11.8.3 Configuring the IP Whitelist
An IP address whitelist exists per virtual port that is used to prevent unauthorized
traffic over a specific virtual port. In order to configure the whitelist the virtual
ports menu must be accessed by the command:
virtual-port <id>
Description of used parameters:
Name
Format
Description
<id>
Number (1-16)
Virtual port ID
Note:
The id depends on the configuration done in the TCONT-VP-BIND
profile assigned to the ONU.
Example:
DM4650(config-if-gpon-7/1/1)#virtual-port 1
DM4650(config-if-gpon-vp-7/1/1/1)#
Then it is possible to configure a rule with an IP address in connection with a
VLAN (single or double-tagged) or even an IP address range (with a netmask in
bit). Instead of an IP there is also the keyword ’all’ possible in order to disable
the white-list for this virtual port.
DATACOM
204.4288.00
Содержание DM984-100B
Страница 1: ...ADMINISTRATION MANUAL GPON ONU DM984 100B ...