© 2015 Datacom Systems Inc
19
VS-10XX-F, VS-11XX-F, VS-12XX-F FASTstart Guide
5 Configuration Examples
5.1 Media Conversion
Use Case:
There are 1G inputs with 10G monitors, or 10G inputs with 1G monitors. It is a
requirement that the speed/media of the traffic is converted so that the monitors can receive the
traffic.
The VERSAstream series is SFP based and can convert from one media type and speed to another.
1.
To set up the above configuration on a VERSAstream, the first step is to install the correct SFP
types to connect to the devices on either end.
2.
The next step is to configure the ports on the device to match the speed of the devices connected
to them (For example, choosing between Auto-Negotiation copper or manually set speed).
Command
Description
set port speed 1,5 10G
Sets ports 1 and 5 to 10G Fiber speed.
set port speed 2 1000X-Manual
Sets port 2 to 1G Fiber speed.
set port speed 3,4 CU-AUTO
Sets ports 3 and 4 to Auto copper speed.
show port config 1-5
Displays the configured speeds for ports 1-5.
1
2
3
4
5
