Datacom Systems DS-1404 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 55

Datacom Systems DS-1404 Скачать руководство пользователя страница 7

Datacom Systems Inc. 2016

7

DURAstream

™

DS-1404, DS-1406, DS-2408 FASTstart Guide

2 Overview

This FASTstart Guide for the DS-1404, DS-1406, and DS-2408 Bypass Switches is
intended to provide you with information needed to get your Bypass Switch up and
running. Additional support, documentation and help can be found on the Datacom
Systems website:

http://www.datacomsystems.com

The DURAstream™ Bypass Switches provide an easy-to-manage external active bypass
failover for data monitoring of critical 1 or 10 Gigabit fiber network segments. Line rate
throughput and real-time data forwarding hardware protects data and allows critical voice
and data applications to perform uninterrupted and meet high demands for quality and
security. Deployed with an in-line monitoring tool, a DURAstream™ Bypass Switch
creates a comprehensive solution for intrusion prevention.

Like all Datacom Systems Data Access Products, the DURAstream™ Bypass Switches are
compatible with all vendor hardware and can be controlled by a Command Line Interface
(CLI).

«
...
5
6
7
8
9
...
»

Содержание DS-1404
























































Отзывы:

Нет отзывов