Datacom Systems DS-1404 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 55

Datacom Systems DS-1404 Скачать руководство пользователя страница 5

Datacom Systems Inc. 2016

5

DURAstream

™

DS-1404, DS-1406, DS-2408 FASTstart Guide

1 Terms of Use

The following terms and conditions relate to the use of this document. Please note
that Datacom Systems Inc. reserves the right, at its entire discretion, to change,
modify, add, or remove portions of these Terms of Use at any time. Please read the
Terms of Use carefully as your use of this document is subject to the Terms of Use
stipulated herein.

1.1 Copyright

Copyright ©2016 by Datacom Systems, Inc. All rights reserved. Printed in the
United States of America. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of
Datacom Systems, Inc.

1.2 License Agreement

Notice to All Users:

By using Datacom Systems, Inc. products, you agree to the

terms set forth. No licenses, express or implied, are granted with respect to the
technology described and Datacom Systems, Inc. retains all rights with respect to the
technology described herein. If applicable, you may return the product to the place of
purchase for a full refund.

1.3 Proprietary Notice

This document contains proprietary information about the DS-1404, DS-1406, and
DS-2408 Bypass Switches Command Line Interface (CLI) and is not to be disclosed
or used except as authorized by written contract with Datacom Systems, Inc.

1.4 Trademark Attribution

Access Your Network

™

,

DURA

stream

™

,

SINGLE

stream

™

,

and VERSA

stream

™

,

are trademarks of Datacom Systems, Inc. All other registered and unregistered
trademarks are the sole property of their respective owners. All specifications may be
changed without notice.

1.5 Certifications and Marks

For information regarding certifications and marks, please refer to the product info
section of our website at

http://www.datacomsystems.com

«
...
3
4
5
6
7
...
»

Содержание DS-1404
























































Отзывы:

Нет отзывов